Читать книгу: «Scientific and practical technomagic», страница 2

If we stopped, then we would have two capacitors filled with a charge up to some nominal value. If we want to release the capacitors, drain the charges, we simply bring the spark gap balls together, there is a sharp flow from the area with high pressure to the area of low pressure with the release of a certain amount of Fire and Light, which immediately go into a bound state in the phonon-gravitonic ethereal field.

But we keep turning the knob. The capacitors are overfilled, but generation, due to the specifics of the electroforking device, continues. Where are the gravitons from?

Yes, from space. The arrester balls are far apart, or removed altogether. Then, with the help of one collector, where is plus, gravitons are pulled out of Space. More precisely, from the inter-thread space of the Space-Time Grid. They are pulled out and transferred with the help of a disk to the second collector. And then it is simply thrown out of it, in the same way, into the surrounding Space.

During this period, the graviton flow moves along the conductive elements of both collectors, the pulsation of which, moreover, is smoothed out with the help of receiver-capacitors. From one point of space we take, to another we transfer. The pressure difference that can allegedly be formed is immediately equalized. It’s like taking buckets of water from one corner of the pool and transferring it to another corner, trying to redistribute the density of the liquid in different corners in one pool.

If we attach wires to the ends of the collectors, continuing to turn the knob, a flow of gravitons will flow through these wires from the end of one wire to the end of the other, and the capacitors will smooth out the ripple.

This is how real electrodynamics is obtained – the movement of the flow of charges through the body of the conductor. One end will then have a negative potential sign – it can be injected or compacted from it. The second end will have a positive potential sign. From it we get rarefaction, pulling out charges, reducing the density of the graviton component of the ether.

And since it is this ethereal component that is “responsible” for such a part of the Space-Time Grid as Time, and it is gravitons that are responsible for the same section of information transfer, then in the definitions of “Kalagia” we are talking about such parameters as Density and Rarefaction of Time.

Time is condensed, pumped – minus. Time is being discharged, density is being drawn out – a plus.

We figured out two parameters, but there are two more – Density and Rarefaction of Space. But this is another type of electrostatics – piezoelectrostatics. The piezo charge generator looks like this

One lighter at the end, when pressed, gives out a minus, the second – a plus. At first I just tried to charge the capacitor with these lighters. It turned out that this had to be done “until death”, and then you will not achieve the result. And how will the flow of the piezo charge in the conductor be ensured? And then came the revelation…

I suddenly clearly realized that it is possible to multiply to the required amount, fill the capacitors, and get a positive charge flow in the conductor using the same electric fork. She has no charge of her own. What was given with that and works. But first it must be completely discharged, reset. Which is what I did.

The discharger zeroed the charge of the capacitors. Then he simply shorted all the segments with a disk to each other. That is, each metal segment on one disc short-circuited with a mating segment on the second disc. All segments without exception. And then he added positive and negative piezo charges to the disks in the right place in the right segments. Everything! Then we turn the knob and the reproduction, filling and dynamics of the movement of piezo charges along the conductors began.

In this case, we are working with phonons. With a positive active charge. This component of the ethereal substance is responsible for the formation of the grid of Space, for the atomic nucleus. Filled with fire energy.

At the end of the wire, where the potential for charging the charge is positive, there the Space becomes denser. At the other end, the density of phonons is pulled out, there is rarefaction, there the Space is discharged – there is a minus.

Thus, we have obtained two more parameters of power for ethereal dynamic devices – Density and Rarefaction of Space.

Let’s move on to the Rod of Hermes itself.

In ancient times, such tombstones were laid on the graves of the Russians, who owned magia and techno-magic. The drawing on the slab is nothing but the incoming flow of nourishment to the central channel of the Wand.

Thus, we have a two-component binary power supply system for a techno-magical device similar to the Wand of Hermes. To do this, we use two electrophore generators, each of which works with its own type of charge.

Previously, when these technologies were used without problems, electrophore machines were multi-station. At least two-post, so that there are power outlets of a different nature at once.

Household electrophore generators were in many homes, like Singer sewing machines.

Inside the body of the Wand there are two channels, for two power parameters. These channels are almost straight, slightly twisted to the right.

The snakes are made of a thick conductor so that there is enough space on this conductor for the movement of each of the two streams. Moreover, these streams will go towards each other – one pulls, the second pumps. The same applies to the center channel.

At the ends of the spirals, balls are attached – the heads of snakes. This is necessary in order to twist the incoming charge flows. Now we draw the diagram.

You have to try both options. Feed each coil separately and feed both coils with a combined double potential. We draw connection diagrams.

Now let’s draw a diagram of the fields of the Rod of Hermes.

Let’s compare our scheme with the scheme from “Kalagiya”.

Everything matches.

Now the question “Why wings”? This is for control and stop. The wings are most likely made of glass. A plus is generated from friction on the glass. The wings are connected to the head. The head is in contact with the channels of the central body. The center channel is powered by a minus. Three wings or one wing – plus is fed into the Central Channel. The center channel stops or slows down. The “Beyond the circle” zone connected with the central channel also slows down or stops.

The launched Rod pumps gravitons into focus, into the Center point. This is where the compaction takes place. But the most remarkable thing is that the Rod begins to pull an excess amount of gravitons from Space into the Central Channel, which are concentrated in the focus of the Rod. An excess of gravitons forms a local zone of excess pressure in this place, which manifests itself in the form of repulsion, pushing objects placed there out of this zone. We observe the phenomenon of gravitational repulsion.

And this is only one kind of techno-magical device called the Rod of Hermes.

Electricity and heat from the ether

Our ancestors did not know electrodynamics, and therefore the mechanical drive of mechanisms was carried out through heating water and producing steam with the operation of steam engines. But even in that short period of time when both concepts, both etherodynamic and electrodynamic, existed in parallel for some time, even then the power generators were driven to generate electricity through heating water and producing steam. Just as it is now done in thermal power plants. Of course, there was also hydrogenation, but nevertheless, obtaining electricity was always associated with turning the electric generator.

This is because it was not an easy task to take and convert an etheric dynamic beam at once, directly into an electric current. More precisely, I would say that this is a simple task, but our ancestors simply did not have time to do it. There were big changes, and the etheric energy was destroyed.

Of course, anti-gravity, replication, materialization, teleportation, etc. are all very cool. But how, after all, would you like to fly to the taiga (well, or to the dacha), build a house, or just at least put up a tent, stick an ether generator into the ground, connect a converter to it and get 220 (380) volts 50 Hz in the network in the amount of power that you need, without any problems? restrictions.

The solution to this problem is very eloquently shown here in this very famous video. If you haven’t seen it, take a good look, and if you have, refresh all the details in your memory.

https/www.youtube.com/watch?v=i19Sm9gUJ9s

And here is the diagram itself

What do we see? First of all, high-voltage power lines. This transmission line saturates the space with high potentials, or in other words saturates the space with electrostatics. Gravitons and phonons. Where do these essential components go? Naturally to the Ground. And if there is a conductor, then an electric charge is induced on it, which flows into the Ground. If we make a small gap in the conductor, then a discharge will occur in this gap and the arc will burn. This is because gravitons are accumulating at one end of the gap, and there is a void at the other-everyone has escaped into the ground. A critical pressure difference occurs, with an explosive transition of gravitons through the gap, and with the release of light trapped in gravitons.

And what is interesting is that at this point of rupture, at the place of arc formation, an electric current occurs. But it’s not DC. This current is pulsing. To be absolutely precise, this is a pulsing unidirectional current of high frequency. This is actually an alternating current, but with no reverse current branch. A remarkable property of this current is that this current is also variable. This means that this type of current has the ability to transform.

That is, what happens. Before the spark gap (before the candle), we have an ether flow in the circuit, but in the spark gap and in the circuit after the spark gap, an electric current flows into the Ground.

This current can and should be converted. This is done using a transformer. The fact is that the electric current after the discharger has a very high voltage and a very small current. We need to use a step-down transformer to lower the voltage to normal household values and raise the current. Next, we rectify the current using a diode, since the field is specifically variable under the power line. You can also add a capacitor and smooth it out with a capacitor. And then we feed it to the phone for charging.

At the same time, the power after transformation-it will remain unchanged. And it is enough just to charge the phone. Well, or one LED flashlight.

Not enough… however… We need at least domestic and industrial volumes.

That is why instead of a power line, we will use an ethereal generator like the Wand of Hermes.

I do not yet know what type of generator should be used – centripetal, centrifugal, or Vajra in general. That is why this section is not a discussion of the issue, but a reflection. The truth will be obtained through experiments.

The generator directs the beam to the spark gap.

The mating part of the spark gap is connected to the Ground, but through a transformer. After the transformer, there is a rectifier, a controller and then a conventional industrial inverter, since, due to the development of alternative energy, they have made a whole line of products with a set of various capacities and parameters.

Next, we configure all this “music” to the desired parameters and use it. The gap in the spark gap and the very intensity of the feed in the head of the Rod are subject to settings.

Rod, unlike power lines, it collects gravitons in the form of a vortex funnel, and twisting them into a bundle directs them to the first half of the spark gap. The second half is connected to the transformer, and through it to the Ground. If the first half is negatively charged, then a positive charge is induced on the second half. Depending on the gap size in the spark gap, the breakdown voltage with a burning discharge arc is set. A positive charge cannot escape into the Ground – it is held by the negative charge of the first half. There is only one thing left – a breakdown and an arc.

But the problem is that a graviton discharge is a pure electric current voltage. Hundreds of kilovolts, and the current is near zero. Therefore, the power will also be near-zero. Useless. Well, maybe for lighting purposes. What to do?

We need to somehow add the second component-Fire, the basis of the current strength. And the carrier substance of Fire is phonons. That’s why I suggested that the carrier generator might be a Vajra. I don’t know yet how to organize a discharge in such a situation, but I think that this issue will be quite easy to solve. After all, our ancestors received heat to warm water without any problems.

Let’s use our theoretical framework and construct a different type of Baton. So far, only theoretically. Now I will explain why only theoretically.

We take the Baton. But the spiral snakes are twisted to the right. In the Rod discussed earlier, the spirals are coiled to the left, and the center channel is twisted slightly to the right. Here, the opposite is true.

Let’s go from the opposite. If the winding of the spirals is right, then this means that this Circle of Influence is connected to minus. That is, the graviton flow, passing through the turbulator (snake’s head), twists to the right at the output.

The central channel, respectively, is connected to the plus and twisted to the left.

The scheme turns out like this

This type of Wand also uses a centrifugal type of energy movement. But only the food signs are reversed. Then the scheme of fields of rotating energy tori will look like this

And what we see in the drawing of the newly constructed Rod. We see that phonons are concentrated at the point of focus. That is, heat is concentrated at the point of focus. This is where our ancestors got their heat to heat water for their steam engines. Fuel-free fireplaces also worked.

But this type of Wand may have another fundamental function – generating electricity from the etheric field directly directly with the parameters of industrial power. But this is what our ancestors did not know.

See the section “Etherodynamics and electrodynamics”. I’ll show you such a generator there. This generator is useless, as it only outputs voltage. The current is almost zero and the power is zero, respectively.

But if we apply our newly constructed Rod according to the same scheme, then the possibility of obtaining an electric current of industrial power becomes obvious

Here’s the thing. When the Wand is focused into focus, either phonons or gravitons are concentrated at this point. And these are particles filled with energy. Either it’s Fire or it’s Light. When you concentrate in focus, this energy is released.

We use light for the purposes of anti-gravity, teleportation, communication and many other things that we will come up with.

We use fire to generate heat, electricity, heat rays, and anything else we can think of.

I’m just going to jump ahead a bit and say that the centripetal type of generator allows you to get these channel, beam formations.

Well, something like that. The theory has started working…

MERCURY. VAJRA. NEW EDITION

It’s spring outside. And everything happens as I expected. Letters to the Ministry of Defense of the Russian Federation do not give anything. Everything is ignored. Now from the word “generally”. At first, at least something was answered, now they are completely ignored. This, in general, is not surprising if we analyze all the information on the topic of how our General Staff conducts the NMD.

We continue on our own.

I have tried running the Rod with two generators. Does not work. The electrophore generator does not want to work with piezoelectric charges. It seemed to me that there is no difference with what type of charge an electrophore generator works with. It turned out that it seemed in vain. There is a difference. Even if the capacitors reverse polarity, this is not because a piezo charge accumulates in the bank. No… the piezocharge drags the Tribocharge along with it. It is he who begins to multiply by electrophoresis and accumulate in capacitors.

And what to do? There are no options left (at least for now) but to develop the topic of mercury use. I don’t see any other options yet.

Let’s remember what unique qualities of mercury we know.

Mercury is a liquid metal at room temperature. Becomes hard at -39°C. If you freeze two mercury cubes in a mold, remove the cubes from the molds, and then touch these cubes with their faces, the faces merge instantly. That is, diffusion occurs instantaneously.

Frozen mercury does not deform. At all. The hardness is the highest.

Why might this be. I put forward a version that mercury has no protons in the nucleus. Only neutrons. The orientation of electrons in the electron shell is also different from the orientation in the atoms of other materials. The electric fields of electrons are not oriented radially, from the center outward, but somehow along the circles of the orbitals. Therefore, instantaneous diffusion occurs. There are no protons in the nuclei – there is nothing to repel, and electrons do not repel with their fields. There is an instant overlap of the shells. The crystal lattice is also not formed. During critical cooling to the point of “freezing” (-39 degrees C), the neutron shells themselves, the neutrons themselves, overlap. It turns out a single, very solid monolith. Hard but brittle.

This is the version… But it is this version that will explain the unique electrostatic properties of mercury.

What is a neutron. This is an “empty particle”. If the proton is filled with Fire, read as phonons, if the electron is filled with Light, read as gravitons, then the neutron is not filled with anything. It is “empty”. And in this state, the neutron can exist for a long time, but only as part of the atomic nucleus. In the free state, the neutron quite quickly, after 11 minutes, decays into a proton and an electron. That is, in a free state, such a configuration is unnatural. There shouldn’t be a void. And this emptiness is filled with Fire and Light – forming two particles, a proton and an electron.

This means that it can be assumed that mercury, under certain conditions, can interact very actively with both phonons and gravitons. Well, about gravitons – this still needs to be thought about, but with phonons – this is almost certain.

What does it mean to interact? Either it is easy to be filled with Fiery phonons, or to pump these phonons through oneself, if one sets a certain pressure difference in any volume of mercury.

Apparently, this is the basis for the property of mercury to turn into gold when filling the required amount of neutrons with phonons and turning them into protons. And the electrons during such a transformation should themselves orient themselves radially with their field in relation to the positive nucleus.

But we are interested in the property of mercury to pump Fire phonons through its volume.

The unique quality of mercury is based on this property, which is necessary for the manufacture and launch of various techno-magical devices.

I have already touched briefly on this property of mercury in the Dome Generator section. As the internal pressure increases, mercury begins to absorb external phonons into itself. Neutrons begin to fill with Fire. If an internal pressure difference is created in a certain volume of mercury, then phonons begin to flow inside from the region of increased pressure to the region of reduced pressure, thereby creating in this volume of mercury on its surface a region of accumulation of phonons and a region of rarefaction of phonons. A positive and negative electrostatic charge of a piezoelectric nature is created.

To get all this, you need to place a certain volume of mercury in a closed cavity and “press” this volume well. Mercury will be filled with phonons.

Now, if we want to get a difference in static potentials, we need to create a pressure difference.

Let’s assume that we have made a cavity. Made from iron. Iron, unlike other metals, does not dissolve in mercury. So that’s iron. The path of the cavity will be cylindrical. Solid screw plugs on both sides. We twist one cork. Pour mercury. Almost to the top. We twist the second cork. We twist until it stops, so that the cork becomes, as it were, a stock. We twist it all the way to create increased pressure inside the mercury.

Created. The mercury was filled with phonons. Now there are options. It is possible, for example, to apply a difference of electrostatic potentials of a piezoelectric nature to the ends. Let’s apply, for example, to the ends. Inside, there will be a pressure difference and an etherodynamic current. Phonon current of fiery nature.

Most likely this current, through space, will close on itself. According to the type of magnetic field around the coil with current.

To increase this current, for example, one end of the cylinder can be heated. At this end, the pressure in the mercury will increase. The current will increase.

At the end where the phonons come, there will, of course, be a plus. If this end touches, for example, the spiral of a gravitational rod, then an etherodynamic current of a piezoelectric nature will flow along such a spiral. Which is what we need.

But we have two snakes. Then on the cylinder we make a minus in the middle, and pluses at both ends. Then, with such a cylinder, both spirals of the Wand can be launched at once. And heating is carried out in the middle of the cylinder. For example, just take it in the middle in your hand. From the warmth of the hand, the pressure in the middle will increase and the ethereal current will flow from the middle to both ends. This technology used to be called “pharaoh’s cylinders”.

Now let’s look at such a device, which our ancestors called “Vajra”. It was considered the weapon of the gods, which could throw lightning.

Here are items stylized as Vajra. India is full of them. Which means it was all very recent.

.

And now we look at the drawing from Kalagia. This is the very first figure from the application table. In the explanation to the picture, it is written that this is nothing but the first method of crystallization of Shunya.

That is, in such a way, in such a configuration, it is possible to concentrate the ethereal substance, which must be stable. For example, in the atom.

But we are interested in this form of crystallization, from the point of view of its application to the construction of the Vajra.

In some sources, this form is called merkaba

But the use of a tetrahedral or trihedral shape is done for convenience. In reality, these are all cylindrical or conical ethereal vortices and their possible combinations.

And now let’s “fasten” the field scheme shown in the figure from Kalagia to this picture.

.

And now we look at the Vajra and “fasten” the scheme of fields to the Vajra.

What is missing? Not enough mercury. And where should she be? The stump is clear – here:

Everything seems to be clear. Let’s do it. All spare parts are taken from the hardware store.

Why did I show it in such detail? Although this is a model, the manufacturing and assembly technology is approximately correct. The only difference is that in the middle there is a more rational shape in the form of a ball. And the arcs, of course, are not attached by soldering, and are not made of wire.

How Vajra works. First, we collect half. Then, using the second threaded rod-axis, we set the excess pressure inside. We counter the second half. With the help of a piezo generator (made of piezo lighters), we set the initial, closed on itself, flow of phonons inside.

We heat the central part. Mercury absorbs additional portions of phonons from space. This occurs before the phonon flux reaches a certain critical density level.

When this level is reached, the flows no longer close to themselves, and the circumferential incoming phonon flow is concentrated in the center and exits in the form of two beams in both directions.

In order for the beam to exit only on one side, some design improvements need to be made. I don’t know this yet.

The current coming out of the vajra is very similar to a laser beam. Only the energy filling of the laser with Light is very low, and in order to increase the beam power to acceptable values, you need to carry a power plant with you for pumping. In the case of the Vajra, the ray is filled with Fire, which is released in a dense ray. Energy supply is the highest. Our ancestors used this as a versatile cutting tool.

For example, as a stone cutter. Here are the Hindu temples. How is it done and how is it done? Now you know. Hand-sized mini-Vajras, like the ones in my pictures.

In order not to carry an electrophore generator with them to obtain a graviton ether flow, our ancestors used electrets. These are devices capable of accumulating an electrostatic charge. A type of permanent magnet with a magnetic field.

Electrets were made from a mixture of ozocerite and rosin. 30% ozokerite and 70% rosin. Ozokerite is a mountain wax – a special black hydrocarbon similar to paraffin with the smell of kerosene. A melt of ozocerite and rosin is made on the stove in a form the size of a hockey puck. Then an electrostatic potential is applied to this washer, for example, from an electric fork. And in such a molten form, the material must cool completely (we apply the potential until it cools down). We take out the electret from the mold. Ready.

And also, if you remember, the Rod of Hermes has a ball at the end. If there is mercury, we heat it, we get a positive flow for spiral snakes. The negative flow through the central channel is obtained by touching the electret. All.

Now the Vajra model needs to be filled with mercury (you can see the dates on the pictures, I haven’t had time yet), assemble it, run it and be very careful… Are you interested? I’m interested too. Very interesting.

Supplement (03/14/2023)

Twisted in my head the topic of how to make the energy beam coming out of the Vajra go out only on one side. Everyone understands why this is necessary. If the beam comes out on two sides, there is a danger of “slashing” itself. And why then Vajra with the release of energy on two sides.

Firstly. it’s a classic. Secondly, if such a vajra is put on an axis, then by rotating it, we get something like a circular saw. Moreover, you can put a double cruciform Vajra on the axis. Then you will definitely get a very effective saw. You can cut megaliths.

For greater convenience, of course, you need a vajra with access to one side. The issue was resolved fairly quickly.

I found the solution in numerous images of the same items stylized as Vajra.

We perceive it as a bell. But there is a nuance here. And why does the bell have such a complex handle, stylized as a Vajra?

The answer is simple – this is the Vajra model, with the release of energy on one side. Let’s draw the energy flows.

From the drawings, everything is more than clear.

We have almost rested chest in the finish line. Just one more step is needed…

More about mercury. Mercury gold. Vajra and others (03/21/2023)

We return again and again to the topic of mercury. What I wrote there during the first thorough approach, they comment on me as a spring exacerbation in a patient in a psychiatric dispensary.

Well, what can you do, all of us, self-taught researchers, in one way or another, are patients of the border department of a madhouse. And here it is not important how you constantly fit into various whores, it is important how you know how to extricate yourself from these batches.

That diagram of the fields of the Vajra, which I gave earlier, is correct. But something else is important here. It is important to find the answer to the question why mercury? What happens inside this mercury? What process? What mechanism is involved?

From the first approach, I put forward the version that there are only neutrons in the nucleus of mercury. And they are empty. Fluff is everything. Delusion. Fornication. Well, it’s okay, we will do another approach, and another, and another … Until we build a clear theoretical picture.

It is important to understand what to build on. Why dance. And here it is, just plain. We dance from a technological technique when mercury is placed in a closed cavity of the same volume as mercury, and then this mercury is heated. What will happen inside the mercury in this case? It should be noted here that there are a lot of varieties of mercury. If you speak correctly, then these are its numerous isotopes. But stable, stable, there are several of them.

This list suggests that if we take, conditionally, a glass of mercury, then the approximate distribution in this glass by isotope species will be approximately the same.

Mercury charge +80. This means that mercury has 80 protons in its nucleus, the rest are neutrons. That is, if we take mercury (200)Hg, then there will be 200—80=120 neutrons

If you take a mercury nucleus and remove one proton from it, or turn it, for example, into a neutron, you get a gold nucleus. The scheme is

There is an isotope of mercury, Hg(197), which independently turns into gold in about three days. In this isotope, the proton of the nucleus absorbs an electron from the electron shell, turns into a neutron, and the nucleus becomes the nucleus of gold (197)Au. This isotope of gold is stable. And it would seem that you take this mercury and make gold. But, that’s just bad luck, all the mercury of this isotope on earth has already ended and has long turned into gold.

So you need to take mercury of other isotopes, make mercury (197) Hg out of the bottom, and wait until it becomes gold in three days. This can be done, but only it is very expensive, since this requires equipment for conducting nuclear reactions. The resulting gold will be much more expensive than the market value of gold.